Improved oxygen delivery in a continuous-roller-bottle reactor

Variations to the original aeration system in a continuous roller bottle reactor of novel design have been tested and compared for optimal oxygen (O) delivery. Reactor operating parameters that affect O transfer are rotation rate, liquid-volume level, fresh-feed rate, and supplementary-aeration rate. Design modifications to enhance gas-liquid O transfer include the addition of wall baffles and center baffles. The number and location of each of these baffles are compared for their effect on k_La values in the reaction chamber. The liquid feed into the system has been modified to improve the axial liquid mixing and O transfer.     

Selective determination of oxygenates in complex samples with the O-FID analyzer

A gas-chromatographic analyzer allowing the selective detection of individual oxygenates in complex organic mixtures, such as gasolines, is described. The analyzer is based on the oxygen-specific response flame ionization detection (O-FID) method. The system operates with capillary columns and includes a cracking reactor to convert any oxygenate to carbon monoxide and a special FID equipped with a microreactor for the catalytic hydro-genation of CO and detection as methane. Hydrocarbons give no signal. The selectivity of the method is better than 1:10⁷ and the linear range approaches 10⁵. The analysis of modern fuels containing oxygenated additives, to improve octane ratings, may greatly benefit from the proposed analytical method.     

丙烷脱氢制丙烯研究进展

介绍了丙烷脱氢制丙烯的研究现状。包括丙烷催化脱氢的热力学、脱氢技术丙烷在膜反应器中脱氢及以氧气和二氧化碳作氧化剂的丙烷氧化脱氢。     

Laser-Induced Fluorescence (LIF) Probe for <Emphasis Type="Italic">In-situ</Emphasis> Nitric Oxide Concentration Measurement in a Non-thermal Pulsed Corona Discharge Plasma Reactor

Laser-induced fluorescence (LIF) is an effective in-situ probe for NO concentrations below 300 ppm in a non-thermal plasma reactor. A new method has been developed to measure in-situ NO concentration in the reactor discharge region using a long-time—on the order of seconds—averaged fluorescence detection. This method, for quantifying NO concentration in a nonthermal plasma reactor, is simpler than a short-time—on the order of nanoseconds—fluorescence detection. For accurate measurement based on the new method, the LIF intensity must be close to the corona-induced fluorescence (CIF) intensity; the CIF intensity serves as a guide in selecting the LIF intensity. We find that a kinetic model proposed earlier works for two-tube reactors and represents the NO concentration in the middle of the reactor, which verifies the assumption of gas plug flow.     

High-productivity continuous biofilm reactor for butanol production

Corn steep liquor (CSL), a byproduct of the corn wet-milling process, was used in an immobilized cell continuous biofilm reactor to replace the expensive P2 medium ingredients. The use of CSL resulted in the production of 6.29 g/L of total acetone-butanol-ethanol (ABE) as compared with 6.86 g/L in a control experiment. These studies were performed at a dilution rate of 0.32 h⁻¹. The productivities in the control and CSL experiment were 2.19 and 2.01 g/(L·h), respectively. Although the use of CSL resulted in a 10% decrease in productivity, it is viewed that its application would be economical compared to P2 medium. Hence, CSL may be used to replace the P2 medium. It was also demonstrated that inclusion of butyrate into the feed was beneficial to the butanol fermentation. A control experiment produced 4.77 g/L of total ABE, and the experiment with supplemented sodium butyrate produced 5.70 g/L of total ABE. The butanol concentration increased from 3.14 to 4.04 g/L. Inclusion of acetate in the feed medium of the immobilized cell biofilm reactor was not found to be beneficial for the ABE fermentation, as reported for the batch ABE fermentation. Names are necessary to report factually on available data. However, the USDA neither guarantees nor warrants the standard of the product, and the use of the names by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Determination of d-glucose in undiluted whole blood using chemically modified electrodes and segmented sample injection in a flow system

A flow system for the determination of d-glucose in undiluted whole blood, in which segmented sample injection and on-line dialysis are used to decrease the red cell volume fraction (haematrocrit) dependence, is described. Glucose is degraded enzymatically by means of immobilized glucose dehydrogenase. The nicotinamide coenzyme (NAD⁺) that is present in the solution is reduced in the enzymatic reaction and is reoxidized amperometically at 0 mV vs. Ag/AgCl on a graphite electrode, modified with phenoxazinium ion. The potential use of the system for clinical analysis is evaluated.     

用微芯片化学反应器实现酶催化化学发光测定葡萄糖的研究

葡萄糖是临床化学诊断以及食品分析中重要的检测项目 ,最常用的测定方法是采用葡萄糖氧化酶(GOD)催化葡萄糖与氧分子间反应 ,生成葡萄糖酸和过氧化氢 [1] ,而对过氧化氢的检测则可采用过氧化酶 (POD)催化鲁米诺的化学发光反应进行 [2 ] .FIA对整个过程的实现是十分有效的方式 ,但由于多采用固定化酶反应器 [3～ 5] 使其在制备及分析上较复杂且费用高 .由 Manz等[6] 提出的微型全分析系统(μ- TAS)在针对不同体系的微量分析及在线监测上均具有突出的优越性 .本文使用的含微混合器的微芯片化学反应器采用μ- TAS设计思想 ,建立了化学发…     

Comparative study of 8-hydroxyquinoline derivatives as chelating reagents for flow-injection preconcentration of cobalt in a knotted reactor

8-Hydroxyquinoline (HQ), 2-methyl-8-hydroxyquinoline (CH₃-HQ), 5,7-dichloro-2-methyl-8-hydroxyquinoline (Cl₂-CH₃-HQ), 5,7-dibromo-8-hydroxyquinoline (Br₂-HQ), 5-sulfo-7-iodo-8-hydroxyquinoline (ferron) and 5-sulfo-8-hydroxyquinoline (SO₃H-HQ) were compared as chelating reagents for on-line sorption preconcentration of cobalt in a knotted reactor (KR) precoated with the reagent. The results obtained with the different HQ derivatives reveal those properties of the chelating reagent responsible for the processes taking place in the KR. The influence of hydrophobicity, acidity, stability of the cobalt chelate and type of substituents in the HQ ring system on the separate steps of the flow injection (FI) preconcentration procedure are discussed. According to the performance characteristics of the different HQ derivatives, the most important parameters for on-line preconcentration in a KR are the hydrophobicity of the reagent and the stability of the chelate complex with the analyte.     

Characterization of the Converging Jet Region in a Triple Torch Plasma Reactor

Enthalpy probe measurements were taken of the converging plasma plume in a triple torch plasma reactor and related to substrate heat flux measurements. Results show excellent entrainment of process gases injected into the converging plasma plume by way of the central injection probe. At lower pressures (40 kPa), the plasma volume is equivalent to at least a 3 cm diameter, 4 cm long cylinder, with relatively uniform temperature, velocity, and substrate heat flux profiles when compared to a typical dc arc jet. Converging plasma plume size, substrate heat flux, and enthalpy profiles are also shown to be a strong function of applied system power. Substrate heat flux measurements show smaller radial gradients than enthalpy probe measurements, because of the high radial velocity component of gases above the substrate boundary layer. Enthalpy probe measurements were also conducted for diamond deposition conditions and approximate temperature and velocity profiles obtained. Problems with the uniform gas mixture assumption prohibited more accurate measurements. Reproducibility of enthalpy measurement results was shown with an average standard deviation of 11.8% for the velocity and 7.6% for the temperature measurements.     

Parametric analysis of kinetic models. XIV. Autocatalytic trigger and oscillator in a flow system

In a flow catalytic reactor with an autocatalytic trigger as a kinetic subsystem, the conditions have been found, in which oscillations appear. Some peculiarities of the kinetic model dynamics, where the kinetic subsystem is an autocatalytic oscillator, are investigated.